HIGH POWER AMPLIFIER


RF POWER AMPLIFIER to be installed in RF system to amplify low RF power to high RF power and to deliver to antenna. ECHO RF Solution's provides versatile amplifiers in operating frequencies up to 6GHz and it is covering the application from FM/AM to the telecommnuications networks and radar. GaN, GaAs FET, MOSFET and LDMOS are used according to the specific customer’s needs and we design amplifiers focusing on efficiency and linearity up to 200W. We offer class ‘A’, ‘AB’,’C’ and high linearity design and our amplifiers have various functions such as ALC, AMP ON/ OFF, output power / back power detection, gain adjustable and overpower shutdown. ECHO RF Solution's amplifier solution has high reliablity and the various control modes such as RS232 and 485 are available. The design and manufactureing processes of ECHO RF Solution's are subject to rigorous quality assurance procedures which differentiate our products from those of our competitors. Our products are cost-effective solutions and we guarantee the quality for 2 years and comply with RoHS Compliant.


Feature

• Extremely cost competitive purchase price
• Various range frequency covering
• Wide range power output from low to high
• Isolator protected output
• Wide Temperature range
• Field Proven reliability
• Smaller size Rugged design
• Several Standard Options available as well as Custom Design


Application

• TERA/GSM/DCS/UMTS/WCDMA/LTE/5G System
• RF Repeater
• DAS(Distributed Antenna System)
• RRH(Remote Radio Head)
• Amplifier for Digital Television


Inquiry

inquiry@echorfsolution.com

website

http://echorfsolution.com




Comments

  1. Mary James15 March 2021 at 18:03

    Your article is good for me because I have needed a information about the AMPLIFIER. Keep shared more information with us in the future. buy bose audio amplifier online

    ReplyDelete

Post a Comment

Popular posts from this blog

ANALOG FIBER OPTIC TRANSCEIVER

Image
ECHO RF Solution provides various fiber optic products including fiber optic transceiver and components for this module such as WDM,coupler, laser diode and photo diode. The fiber optic transceiver consists of transmitting part(Donor unit) that converts RF signal into optic signal and receiving part(Remote unit) that converts optic signal into RF signal. The donor receives RF signal from base station and this signal is combined with modem signal(29 TX) in the donor unit. This signal comes to LD to be converted from RF to optic signal and this converted signal comes to PD to divide RF and Modem signals in remote unit. The modem signal(29.9MHz) is transferred to the modem(29 RX) for TTL communications(Interface : D-9PIN) in remote unit and RF signal goes out by TX out port for DUT. TX and RX paths have different wavelength, but it could be transmit signals via single optic cable using WDM(Wavelength Division Multiplexer). WDM has broadband wavelength(WDM : 1310+/-40nm & 1550+/-40nm) ...
Read more